peak detection
英 [piːk dɪˈtekʃn]
美 [piːk dɪˈtekʃn]
峰值检波，峰值检测
双语例句
- When the peak detection process is done, the peak area is converted into the process value and displayed in the grid beside the peak name in the value field.
当峰检测进程开始进行的时候，峰面积被转换成测量值并被显示在峰名称旁边的测量值方格内。 - Design of AC Voltage Peak Detection Instrument Based on Modbus-RTU
基于Modbus-RTU协议的交流电压峰值表设计 - Time and peak detection for random pulse sequence at ns level
随机脉冲序列的ns级时间检测及峰值检测 - Finally, we investigate the relationship between the determination of the output decision threshold of correlation, the probability of correlation peak detection and the error tolerance of the spread spectrum sequence.
研究了相关器输出判决门限的确定及相关峰检测概率与扩频序列的容错能力之间的关系。 - Application of Peak Detection in Data Acquisition Board
峰值检测技术在数据采集卡中的应用 - The simulation result shows that if a leading edge detection method rather than the peak detection method is adopted, with a small increment of observation time, a much more reliable TOA measurement could be realized.
仿真结果表明：采取边缘检测方法，并适当的增加观察时间，可以实现比传统的峰值检测可靠的TOA测量值。 - A kind of automatic adjustment method of CCD binary threshold was designed, which is based on the peak detection circuit of positive single pulse.
设计了一种利用单脉冲正向峰值探测电路构成的CCD二值化阈值自动调节方法。 - The principle of peak detection is introduced. The software and the hardware about peak detection are discussed. In the end, an experimental wave is given.
在详细论述数据采集卡中峰值检测的原理基础上，从硬件和软件两个方面分别论述了峰值检测在数据采集卡中的实现，给出了峰值检测电路的组成框图、仿真结果，以及实验结果。 - To improve the resolution and the precision of the reconstruction, an after deconvolution processing method, namely, the moving threshold peak detection technique has been established.
为提高系统的分辨率和重建精度，本文建立并采用了动态阈值式峰值检测法，收到了良好效果。 - The function and principle of the detecting Instrument for pressure machine were introduced, the hardware design of signal amplifier, peak detection circuit and software design were discussed at details.
介绍一种用于锻压机械压力监测的测量仪的功能及工作原理，并对测量仪中弱小信号放大、峰值检测等硬件电路及软件设计进行了详细的阐述。 - Peak Detection and Phase Measurement Method based on Neural Network
基于神经网络的峰值检测与相位测量的研究 - Based on the detection principle of pyroelectric sensing elements, this paper presents a symmetrical peak detection method of continuous double plus-minus pulse signals to eliminate external interference in fixed position heat source.
根据热释电敏感元件的探测原理，本文提出一种对正负脉冲信号和连续正负脉冲信号进行对称峰值检测的方法。 - Scale Extremes and Automatic Peak Detection
尺度极值与峰值检测 - At the same time, according to the transmission characteristic of the returned ultrasonic, we use the wavelet analytic method to conduct operation processing the echo signal and propose the peak detection method based on the wavelet envelope principle.
同时，根据回波信号的传输特征，利用小波分析法对回波信号进行运算处理，提出了基于小波包络原理的峰值检测方法。 - The implementation of a data acquisition board based on peak detection is presented.
阐述了峰值检测应用于数据采集卡的实现方法。 - Through Hough transformation, relatively difficult global detection problem in the image space could be transformed into relatively easy partial peak detection problem in the parameter space.
通过Hough变换，图像空间中较为困难的全局检测问题就转化为参数空间中相对容易解决的局部峰值检测问题。 - At first, the multiple access system using peak detection of Chirp signals is analyzed, the multi-user interference can be basically avoid by arrange of the center frequency of users.
首先分析了采用Chirp信号分数域峰值判决的多址系统的性能，通过对用户中心频率的安排可以基本避免用户间的干扰。 - In addition, when the signal to noise ratio ( SNR) becomes lower, the correlation peak derived by the traditional cross-correlation method is not very obvious and in correlation peak detection, it is prone to false alarms.
利用互相关法测向，当信噪比降低时，相关峰变得不明显，在进行相关峰检测时，容易产生虚警。 - The detected light signal must be processed initially, which involve the weak signal amplification, filtering and the digital signal converting, so amplifier, filter, peak detection circuit etc are designed in this thesis.
探测器探测光信号后要进行一些初始的信号处理，这部分主要是对探测到的微弱信号进行放大、滤波和对信号进行采样获得数字信号，文章进行了放大、滤波、峰值检波电路等设计。 - In this system, we use white-light interferometry to demodulate interference signal and use peak detection method to demodulate FBG sensing signal.
在此系统中，我们采用白光干涉技术对干涉信号进行解调，采用波峰检测方法对FBG传感信号进行解调。 - Similarly two objective functions are designed based on peak detection and signal similarity respectively, combined with real-coded genetic algorithm to form a novel method.
设计了基于峰值检测和信号相似性的两种目标函数，结合实数编码遗传算法提出了辨识连接强度的方法。 - At the same time, detection technology developed from the original target detection to the target identification, in other words, from the peak detection and target imaging to waveform analysis.
同时，探测技术也从原来的目标检测发展到目标识别，即从峰值检测、目标成像发展到波形分析。 - This peak detection circuit is mainly designed to achieve the shielding of noise and other weak signal, the peak holding and the peak-time discrimination.
本文设计的峰值检测电路主要完成对噪声等弱信号的屏蔽、峰值信号的保持以及峰位甄别。 - DSP reads valid data form FPGA for digital filtering and peak detection. Based on the original design, this thesis proposes some amendment of hard circuit including the hardware filter circuit and the USB interface circuit.
DSP读取有效脉冲数据并进行数字滤波、峰值检测等操作。本文仔细研究了原有硬件设计方案，并在此基础上提出了硬件电路修改意见，包括硬件滤波电路和USB接口电路的增加。 - The hardware design and software of system were described, digital filter and peak detection algorithms were designed by using MATLAB software, and use MATLAB to simulate theoretical process.
介绍了系统硬件电路和软件的设计方案，采用MATLAB软件设计数字滤波器和峰值检测算法，并进行理论仿真。 - The early technology used in read/ write channel is peak detection, magnetic record density has been increased significantly as a result of the application of partial-response maximum-likelihood.
早期的读/写通道基于峰点检测技术，之后部分响应最大似然通道技术的应用显著地提高了记录密度。 - The peak detection method and the wave centroid method with two rulers have great measuring error. And because of the randomicity of noise, their measuring error changes within a great range.
峰值检测法和双尺形心法的测距误差偏大，且受噪声随机性的影响，它们的测距误差在一个较大的范围上变动。 - A large error rate would be caused by using the traditional peak detection method.
采用传统的峰值检测方法将导致较大的误码率，无法满足读出数据数据正确要求。 - Then, designing of the capacitive detection, peak detection and signal acquisition circuits, using these circuits to measure the actual capacitance sensitivity field of the water/ air, and then using the measured capacitance data in the image reconstruction.
然后，研究设计了电容检测、峰值检测及信号采集电路，利用这些硬件电路，实际检测了水/气两相流的电容敏感场，并利用实测的电容数据进行了图像重建。 - To achieve beam size measured real-time by interometry, the algorithm for processing interference pattern based on peak detection is developed in this paper, and some tests is made for this algorithm.
针对干涉法在线测量束流横向截面尺寸的要求，开发了基于峰值检测的干涉图样处理算法并对该算法做了测试。